Garden hose

Cut off the beginning of the garden hose carefully, and make a hole left and right. Stretch two threads through the holes of the garden hose to the nuts of the carveheadholder. Do this in a way that the garden hose is close to the needle does not get under it. Attach the garden hose on the side of the carveheadmover and on the side of the baseboard with two metal strips. Cut off the garden hose on the edge of the baseboard and attach a female connectionpart to it.

Vacuumcleaner

Attach the piece of the garden hose that is left with one side to the vacuumcaleaner and on the other side of the garden hose you attach the male connectionpart.

Arch

Bend a small metal tube one quarter round, and drill a hole on the end of the tube. Drill a hole in the front of the carveheadholder and attach the arch in the hole. Connect it in a strong way and attach a string from the hole in the tube to the garden hose.